<p id="xia76"></p>
護坡模具是選用工程聚丙烯為原料，生產成本較低，價格也較低，適合大批量生產，對于工程較大的應該選擇塑料護坡模具比較合適，但是對于工期短，使用量小的話，選用護坡鋼模具比較合適
The moulds for slope protection are made of Engineering polypropylene with low production cost and low price. They are suitable for mass production. For larger projects, the moulds for slope protection should be plastic. But for short construction period and small usage, the moulds for slope protection steel are more suitable.
護坡模具在避免資源浪費的問題上，積極響應，有效的做到了護坡模具產品資源的合理回收利用。一般的工程到了工期結束的時候，都會把用過的護坡模具產品處理掉
In order to avoid the waste of resources, the slope protection mould responds positively and effectively realizes the rational recycling and utilization of the slope protection mould product resources. Generally, when the construction period is over, the used slope protection die products will be disposed of.
這時候護坡模具廠家的回收給雙方都營造了利潤，對于施工方來說，廢舊的護坡模具產品一點用也沒有，讓護坡模具廠家回收可以讓自己得到一定的利潤
At this time, the recycling of slope protection mould manufacturers creates profits for both sides. For the construction side, the waste slope protection mould products are useless at all. Let the slope protection mould manufacturers recycle can make a certain profit for themselves.
而對于模具廠家來說，回收的廢舊模具產品也可以合理的利用，這樣就很好的避免了浪費。所以說這種良好的循環模式，促進了護坡模具廠家的良好發展，對護坡模具行業的進步有著重要的作用。
For die manufacturers, recycled waste die products can also be used reasonably, which can avoid waste very well. Therefore, this good circulation mode promotes the good development of slope protection mould manufacturers and plays an important role in the progress of slope protection mould industry.
<p id="xia76"></p>
